T3 CURA User Manual Download Page 8

8

ENGLISH

CHECK ALCI EVERY TIME YOU USE THIS HAIR DRYER

This hair dryer is equipped with an Appliance Leakage Circuit 
Interrupter (ALCI), a safety feature that renders it inoperable under 
some abnormal conditions, such as immersion in water.  
To make sure the ALCI is functioning properly and the exclusive 
water sensing system (ALCI) is working, perform the following test:

1.   Plug in the hair dryer and press 

the test button on the plug. 

2.  The hair dryer will stop working. 

There will be an audible click and 
the reset button will pop out

3.  To reset the ALCI with a Reset 

button: Unplug the unit. Then 
push the Reset button in, and 
reinsert the plug into the outlet.

4.  Be sure to repeat the test every time you use this hair dryer to 

confirm the ALCI is operational.

5.  If the ALCI is not functioning properly, return the hair dryer to a 

service center.

6.  If a water immersion occurs, bring this unit into a service 

center. Do not try to reset.

Should the dryer go off and the Reset button pop out during 
use, this could indicate a malfunction in the dryer. Remove the 
plug from the outlet and allow the dryer to cool. Reset the ALCI. 
Reinsert the plug into the outlet. The dryer should function 
normally. If not, return it to a service center for examination and 
repair.

 

OPERATING INSTRUCTIONS

CURA

RESET
TEST

Summary of Contents for CURA

















Reviews: