T.Werk GmbH - CHRONOS Click Pitched roof solution - Assembly instruction Page 11 of 24
Thin metal screw 6.0x25
A2/Bi
Material: bimetal
(stainless steel A2/tip: hardened steel)
with washer EPDM E16; SW8
clamping thickness up to 8 mm
with building authority approval
PU: 100 pcs
SOV00048
0,008 kg
CHRONOS middle clamp set
Pre-assembled middle clamp for all framed PV
modules from 29 - 51 mm frame height.
Clamp width 19 mm
SOV00278
0,055 kg
Compensation profile
Available for all frame heights (FH)
Depending
on FH
0,014 kg
bis
0,020 kg
7 Transport
For the transport of the CHRONOS Click assembly system, the CHRONOS Click profiles are
packed into bundles according to the length of the profiles and lashed. The small material of
the CHRONOS Click assembly system is picked in cartons and these are then packed together
on pallets, wrapped and lashed.
Make sure that all packages are well secured and protected from damage during transport.
Otherwise, the packages may be damaged or lost.
8 Storage
Recommendation of T.Werk GmbH:
Only store the assembly material in closed rooms, fenced areas or under supervision. Other-
wise there is an increased risk of theft of the assembly material.
