T-VIPS CP525 cMux, User Manual

Page: 221 / 292

WEB Interface 221
ID: um_tsmux CP525 cMux User’s Manual Rev. 5.20.12 (3944)
Figure 8.130 Default
port priority queues
The default priority queue page includes a table, shown in figure 8.130 , which lists all the
available inputs. Each input can be assigned any of the available priority queues.
8.7.2.10 Advanced
The advanced menu groups together several advanced features. These features are typically
used for special purposes and is not commonly used in normal multiplexing operations. Several
of the advanced features found on this page requires a licence key to be visible and properly
functioning.
8.7.2.10.1 Automatic PID Remapping
The configuration of automatic PID remapping can be seen in figure 8.131 .
Figure 8.131 Configuration of automatic PID remapping
The formula for remapping of PID values are described below. If the PID value is already taken,
the next available PID value within the PID range will be used.
PID value = ’Start PID’ + (’Port Index’ x ’Port Offset’) + (’Service Index’ x ’Service
Offset’) + (’Component Index’ x ’Component Offset’)