M501/M303 series scale operation manual
REV: Y1, July 2, 2013
M501/M303 series scale operation manual
3. OPERATION
3. 1 Power ON/OFF
Switch on the scale by pressing
. The display is switched on
and the self test is started.
If you want to switch off press the key again.
3. 2 ZERO
Environmental conditions can lead to the scale exactly zero in spite
of the pan not taking any strain. However, you can set the display of your
scale to zero any time by pressing
key and therefore ensure that
the weighing starts at zero.
3. 3 TARE
The weight of any container can be tared by pressing
key so
that with subsequent weighing the net weight of the object being weighed
is always displayed.
Load weight on the pan.
Press
key. Zero is displayed, and tare is subtracted.
Remove weight from the platform. Tared weight is displayed.
It can set only one tare value. It can display with a minus
value
Press
key. Zero is displayed, tare weight is cleared.
-2-
3. 4 Hold function
Press "Hold" before load at the pan, so HOLD is active now. "Hold
" and "-----" appeared at the display.
After put load at the pan no indication until a stable non-zero
weights is detected. During this period "----" is indicated. (no indication
of unstable value).You will hear a beep, when stable weight is detected.
Indication of calculated HOLD-value with small "HOLD" in display
as current version. After unloading the pan the value is indicated for 10
Seconds. After that normal weight displaying is resumed.
Pressing “Hold”, while the HOLD-function is active, will cancel the
HOLD-function.
3. 5 BMI function
Press
key on the weighing mode, display will show the last
height
“xxxxx”, use
key to shift twinkling digit, and press
key
to increase the value, press
key to confirm it, display will enter into
the BMI mode,
“BMI” indicator will be shown, people stand on the
platform, display will show the weight value and the BMI bar graph.
Press
key will turn back to normal weighing mode.
3. 6 Set Back light
Press
at
normal weighing model, display show
F1 off
,
press
twice, display show
F3 bk,
then
press
key to enter it:
Bl au
Set the backlight automatic on.
Bl on
Set the backlight always on.
Bl off
Set the backlight always off.
-3-
Summary of Contents for M501
Page 1: ...M501 M303 Medical Scale...
