background image

 

                                                                                                    14 
 

6.

 

Safe riding 

6.1.

 

Inspection before riding 

For  your  riding  safety,  please  make  an  inspection  before  riding  under  the  precondition  of  having  removed  the 

charging plug and shut down the vehicle. 

For your safety, please carefully read and remember the following warnings:   

  When  you  enjoy  the  funs  of  riding  T-ROBOT,  you  may  also  face  the  risk  of  accident  injury  caused  by 

unbalance, collision and toppling. For your and others’ safety, please ensure the T-ROBOT is in good service condition 

and carefully read and understand all user materials provided by our company before riding. 

  During your riding, please wear the helmet and fasten the belt to protect your head.   

  Avoid  running  on  the  impedimental  or  smooth  surface  to  prevent  the  unbalance  or  toppling  caused  by 

insufficient friction force.   

  Never let any children, the elder and the pregnant ride the T-ROBOT.   

  Do not ride T-ROBOT after drinking or using drug.   

  Do  not  carry  too  many  goods  during  the  riding  of  T-ROBOT  to  prevent  the  injury  caused  by  excessive 

inertia.   

  Abide by the national and local traffic rules.   

6.2.

 

Check the handle 

Under the precondition of having unplugged the charging plug and shut down the vehicle: 

1.

 

Check if there is any looseness or breakage with the handles. If necessary, contact one of the authorized 

service centers of Shanghai New Century Robot Co., Ltd for maintenance. 

2.

 

Check if the handles can be smoothly turned or not. If necessary, contact one of the authorized service centers 

of Shanghai New Century Robot Co., Ltd for maintenance. 

3.

 

Check if the buttons on the handles can be smoothly pressed or not. If necessary, contact one of the 

authorized service centers of Shanghai New Century Robot Co., Ltd for maintenance. 

6.3.

 

Check the triangle 

Under the precondition of having unplugged the charging plug and shut down the vehicle: 

1.

 

Check if there is any looseness or breakage with the triangle. If necessary, contact one of the authorized 

service centers of Shanghai New Century Robot Co., Ltd for maintenance. 

2.

 

Check if the left/right knob switches of the triangle can be smoothly turned and verify it is in the neutral 

position. If necessary, contact one of the authorized service centers of Shanghai New Century Robot Co., Ltd 

for maintenance. 

6.4.

 

Check the accessory case 

Under the precondition of having unplugged the charging plug and shut down the vehicle: 

1.

 

Check if there is any looseness or breakage with the accessory cases. If necessary, contact one of the 

authorized service centers of Shanghai New Century Robot Co., Ltd for maintenance. 

2.

 

Check if the cover plates of accessory cases can be opened/ closed smoothly. If necessary, contact one of the 

authorized service centers of Shanghai New Century Robot Co., Ltd for maintenance. 

Summary of Contents for T-Robot-O




































Reviews: