5 STEPS TO WORLD OF EFFECTS
Using your ToneBug Flanger
Insert a 9V alkaline battery or connect to an electrical outlet using the
T-Rex Fuel Tank power supply (not included).
Plug your guitar into the INPUT jack, and run a lead from the OUTPUT
jack into your amp.
Use the Chorus/Flanger switch to choose which effect you want.
Use the RATE knob to set the speed of your modulation, and the
DEPTH knob to choose how “heavy” you want the chorused or
flanged effect to be.
Then use the LEVEL knob to set your overall output volume – and go!
TECHNICAL SPECIFICATIONS:
Input Impedance @ 1KHz
Higher than 1 M Ohm
Output Impedance @ 1KHz
Lower than 1 K Ohm
Power supply
9V DC
Minimum Power supply Voltage
8V DC
Maximum Power supply Voltage
12,5V DC
Current Draw @ 9V DC
75 mA
Maximum input signal Vp/p
2,5 Vp/p
Battery Type
9V battery 6F22 Alkaline
Battery Life
0,5 to 1 Hours
External connectors
Input Jack. Output Jack, 9V DC Jack (center
pin negative)
Controls
On/Off, Rate, Flanger, Depth, Chorus
Depth
120 mm
Width
78 mm
Height
60 mm
Weight (excl. battery)
0,404 Kg