T-Rex TEX-51127 Installation Manual Download Page 3

Page 3

FIG 10

FIG 11

FIG 16

FIG 17

FIG 18

FIG 13

FIG 14

FIG 15

STEP 6 

    

 

6) It is now time cut into the factory grille honeycomb pattern and separate the factory
grille shell to re-purpose and utilize with your new T-REX Grille.

STEP 7

 

 

7) Using a 90 degree cutoff wheel, zip saw, sawzall or 
something similar, cut along the presented red line.

STEP 9 

 
9) For those that do want to feature the Chevrolet Bow Tie Badge, you will need to first 

remove it from the factory grille. Flip it face down to access the tabs that secures the 

badging. From the back side, use a flat head screw driver to pry the tabs free and pop 

loose the badge. From the front side pull free from the factory grille.

STEP 8 

 

8) At this point, check over your work and make certain your cut reflects the images 

presented here. 

SEE FIGURES 10 & 11

SEE FIGURES 10 & 11

SEE FIGURES 16 - 18

SEE FIGURES  13 - 15

Upper Class Grille

Main grille INSERT - #54127 / #54131 / #54133 / #51127 / #51131 / 51133

  

2016-2017 ChevroleT SIlverado 1500

GRILLE INSTALL - Continued

BOW TIE BADGE REMOVAL

GRILLE Shell disassembly COMPLETE

BOW TIE BADGE REMOVAL

Summary of Contents for TEX-51127










Reviews: