JUST SWITCH IT!
In and outs
PolySwitch AB features 1 set of stereo in-
puts (input L, input R) and 2 sets of stereo
outputs (output A-L, output A-R, output
B-L, output B-R). To use PolySwitch AB to
send your instrument signal to 2 separate
amplifires (for example), just plug your
instrument into the input jack(s) and
run lines from the output jacks to your 2
amplifiers. Use the footswitch on the top
of the unit to switch between the A and
B outputs.
Mixed signals
Your PolySwitch AB can also work
“backwards”, letting you send signals
from 2 different instruments into a single
amplifier, mixer or other unit. To use
PolySwitch AB in this way, simply plug
your instruments into the output jacks,
and use a line from your input jack(s) to
your amplifier or other destination.
Buffer switch
On the back of your PolySwitch AB,
you’ll find the buffer on/buffer off
switch. In the on position, this switch
will boost your input signal to com-
pensate for signal loss due to extra
long cables or other factors. Note
that the buffer function only works
when sending an instrument signal
to amplifiers – not “backwards” as
described under Mixed signals on
the previous page.
Warning:
Do not attempt to connect
PolySwitch AB between an amplifier
and speakers, as this can permanent-
ly damage the unit.
DC IN
BUFFER
AMP 2
AMP 1
SWITCHING BETWEEN TWO AMPS
Summary of Contents for PolySwitch
Page 1: ...PolySwitch USER MANUAL ...
