Page 1
START HERE
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION.
Auto makers offer varied models to each vehicle and occasionally manufacture more
than one body style of the same model. To assure your part is correct; our tech
department can be contacted at [email protected] to verify fitment and assist with
technical questions. All other inquires can be directed to [email protected]. In the
event you do not have internet access please call 1-800-287-5900.
STEP 1
1) Turn off engine and chalk tires with
stop block.
Open Hood. Disconnect Battery.
STEP 2
2) Begin by removing all of the
hardware that secures the factory
grille to the vehicle core support.
There should be the (3) 10 MM bolts
across the top near the front grille
shell.
* APPLICATION MODELS VARY. WE RECOMMEND TO VERIFY FITMENT BEFORE BEGINNING INSTALLATION PROCESS.
* IMAGES FEATURED IN THE INSTRUCTION DOCUMENTS MAY NOT ALWAYS EXACTLY MATCH YOUR GRILL.
FRONT BUMPER REMOVAL
SEE FIGURE 2
PRO TIP:
Before you begin, use “3M Painters Tape” to
apply a protective guard around the work areas.
Attend to the fender and bumper valance. This will
help protect the paint and finish of your vehicle.
FIG 1
(1) TORCH Grille - Main
(1) 40” LED - Part #6311271
OR
Stealth - Part #6311271-BR
OR
(1) 30” LED - Part #6311281
OR
Stealth - Part #6311281-BR
(1) - Large Bottom Mounting Plate
(6) - #10 Screws
(6) - #10 Flat Nuts
(6) - Flat Washers
(6) - 10/30 Nylon Lock Nuts
(6) - Trim Panel Retainer Clips
- Drill
- 1/8” Drill Bit
- Screwdriver set (Phillips)
- Needle Nose Pliers
- Socket Set
- Ratchet Tool
- 1/2” Plastic Spatula
Tools Required
Hardware included
Parts included
TORCH Main Grille
Main grille INSERT - #6311271 / #6311281
2016-2017 Chevrolet Silverado
GRILLE REMOVAL & Grille Installation Guide
