MANUAL BATTERY LINK(OVERIDE FUNCTION):
BATTER MONITOR
WIRING
In an emergency situation (defective or empty Main Battery) or in case of higher power
consumption the two batteries (Main/Aux) may be connected together by activating the
link button AUTO/LINK (red LED manually linked is on) After a laps of time of 30 minutes
(or immediately after activating the AUTO/LINK button) the system returns to the
Automatic mode. The load sharing function with the manual battery link reduces the
stress on alternator, wiring and the batteries in conjunction with the use of electric
winches. If high power consumption is needed from both batteries for long time, actuate
the AUTO/LINK button again, the system return to automatic mode (red LED manually
linked is off) than press AUTO/LINK button within 6minutes to preventing from batteries
separation. The system will AUTO RESET after approx 30 minutes.
In case the dual battery system damaged by fire, welding spikes, salt water, vehicle
crash etc, the following instructions show how to link the two batteries.
1.cut the green wire leading to the soleniod (terminal 2) so that the remaining length is
long enough to make contact with the negative terminal of one of the batteries (a vehicle
panel earth can also be used)
2. Connect this green wire from the solenoid to the negative of one of the batteries or
earth. You will hear the solenoid "clack" when the batteries link.
3.there will now be no automatic disconnection. While the green wire is connected the
solenoid is linked and draws energy.
EMERGENCY INSTRUCTIONS
Page 4 of 4
BM
BM
Summary of Contents for DUAL BATTERY SYSTEM
Page 1: ......
