T.I.P. GROOM-IT, Operator Instructions Manual

Page: 13 / 17

Groom It
12
Figure 3: Wheel Assembly
Ref Part# Description Qty
1
FN65126 Cotter Pin 2
2 FN33092 ¾" Flat Washer 2
3 TP4017A Axle, Zinc Plated 2
4 TOSC-12 Set Collar, ¾" 4
5 TP4025 Tire/Wheel Assy 2
6 TP4026 Replacement Bushing for Wheel Assy 4
MAINTENANCE:
Grease each wheel daily and check tire pressure.
To change tire, block up unit; remove pin #1 and washer #2. Loosen #4 collar, pull axle
#3 out. This will allow wheel assembly to be removed from frame. Check bushing and
axle pin. To re-assemble do the opposite.
1 2
3 4
5
6