6
Run a part of the cable downward in a curve so as to prevent water
flowing freely along the cable to
the plug or the plug socket (C). In case plug or socket have got wet, do avoid any contact! Interrupt
current supply to the plug socket!
Run a part of the hose downward in a curve so as to prevent water
flowing freely along the hose to
the pump (D). In case the pump has got wet, pull out mains plug!
-Do never hang up or transport the pump by the cable!
-Protect the pump from freezing in winter!
-Take special care in following these safety guidlines when children are near by.
4.3. Installation
-Order of setting up (see
fi
g. 1):
1.aerating pump, 2.hose approx. 10 cm, 3.non-return valve, 4.hose and 5.air stone.
5. Electrical connection
The appliance is supplied with line cord and plug. Do not carry or pull the unit by the line cord or plug.
Protect the plug and the line cord from heat, oils and sharp edges.
Check that the voltage shown on the label of the unit corresponds to the voltage of the
mains supply. The person responsible for the installation must ensure that all electrical
connections are earthed according to the electrical regulations of the authority in the area.
Connect the unit only to power supplies with residual current circuit breaker (RCCD) with
sensitivity of 30mA (DIN VDE 0100T739). (earth leakage system)
17
Summary of Contents for API 100/1
Page 138: ......
Page 139: ...Abbildung 1 ...
