T.I.P. 30306, Operation Instructions Manual

Page: 23 / 93

7
Always operate the appliance in water. Do not run dry as this may cause
overheating of pumps and damage the entire unit.
Prior to placing the unit in the water, disconnect the power supply to all units
used in the water.
Keep from temperatures below zero and store in a environment protected from
frost.
Before operating the unit check that that the pump is placed in an upright and solid postion. The
appliance has to be placed on a flat basis.Inspect the pump prior any installation, check that the line
cord or the plug are not damaged. Do not use the unit if the cord or plug are damaged and return it to
the shop/seller for assistance. Plug the unit into a 230V socket.The pump will start to work.To switch it
off simply unplug it form the mains.
Always disconnect the unit from mains before any maintenance. Do not make any technical
modification to the unit, nor adjust the flow rate while it is immersed in water. Always operate the
appliance in water. Do not run dry as this may cause overheating and damage the entire unit.
7. Orders of Spare parts
The quickest and cheapest way to order spare parts is on the web. Our web site www.tip-pumpen.de
offers a detailed internet shop for spares and enables customers to place an order with few clicks. In