T-Home Comfort Pro P 300 User Manual Download

Page: 24 / 152

Comfort Pro P 100/300/500 System Telephones

Key Assignments

Muting Key

To deactivate the microphone during a call. The illuminated LED of the key indicates that the microphone is

turned off. The LED of the key is illuminated when the microphone is deactivated. The ringer of your

telephone can be switched off for incoming calls over the muting key.

Disconnect Key

Pressing this key ends the current call.

Headset Key

If a headset is connected and switched on (to switch on a headset, see page 120), calls can be accepted and

calls can be ended by pressing this key. The LED of the key is illuminated when a call is made via the headset.

It is also possible to enable a second person to listen in on a call over a connected headset while you are

telephoning over the handset. To enable, press the headset key during the call. Listening-in over the headset

is now activated, the LED on the headset key flashes.

Enquiry Key

To initiate and end an enquiry call. After you have ended an enquiry call, switch back to the call being held

with this key.

Plus/Minus Key

This key offers various functions which depend on the device status:

Summary of Contents for Comfort Pro P 300

























































































































































Search results

Summary of Contents for Comfort Pro P 300

Reviews:

Related manuals for Comfort Pro P 300

Brands by name

Popular brands

T-Home Comfort Pro P 300, User Manual

Search results

Summary of Contents for Comfort Pro P 300

Reviews:

Related manuals for Comfort Pro P 300

Brands by name

Popular brands