T-Home Comfort Pro P 300 User Manual Download

Page: 15 / 152

Using Your Telephone

Comfort Pro P 100/300/500 System Telephones

Attaching the Pedestals and Adjusting the Inclination

To pull the pedestals out, press them in slightly (a). To replace them, press the pedestals in slightly (a) and

push them back in (b). The pedestals lock into place in the notches.

There are four positions of inclination possible on the Comfort Pro P 300 and on the Comfort Pro P 500 (see

A, B, C and D), depending upon the direction in which the pedestals have been attached.

Inclination position

Degree of inclination

30°

26,5°

23°

21°

A B C D

Comfort Pro P 100

Comfort Pro P 300 / Comfort Pro P 500

Summary of Contents for Comfort Pro P 300

























































































































































Search results

Summary of Contents for Comfort Pro P 300

Reviews:

Related manuals for Comfort Pro P 300

Brands by name

Popular brands

T-Home Comfort Pro P 300, User Manual

Search results

Summary of Contents for Comfort Pro P 300

Reviews:

Related manuals for Comfort Pro P 300

Brands by name

Popular brands