10
Configuring the Comfort Pro P 300/500 PC
Comfort Pro Tab
Configuring the
Comfort Pro P 300/500 PC
When starting the Comfort Pro P 300/500 PC for the first time, the configuration assistant used to configure
the Comfort Pro P 300/500 PC opens automatically. These options can subsequently be accessed via the
Options
menu entry (see also
Application Menu
starting on page 23).
Comfort Pro Tab
3. In the
Sound recording
section, click on
Advanced
. (if
available). Change the
Hardware acceleration
to
Full
and
the
Sample rate conversion quality
to
Best
. Confirm the
changes with
OK
.
4. Close the
Audio
tab with
OK
.
The data required here (the communication system’s IP address
and device ID) can be obtained from your system administrator.
The
Connection
setting should only be changed if you want to
connect to the communications system via an RAS dial-up con-
nection (if working at home or for a telecommuting workstation).
