T-Comfort Comfort Pro S, Mounting And Commissioning Manual

Page: 66 / 200

64
Mounting the Comfort Pro S Rack InfoCom System Scope of Delivery
Scope of Delivery
■
One communications system Comfort Pro S Rack
■
One AC adapter with connection cable
■
Connection cable for the ISDN S
0
port
■
V.24 patch cable (connects V.24 card with front panel)
■
1 CD
Installing Interface Cards
(Example: Fax/V.24 Card)
Please note also the explanations in these sections: Installing Interface Cards starting on page 34 and
Installing a Fax/V.24 Card starting on page 36. To install the Fax/V.24 card, perform the following steps:
1. Switch off the Comfort Pro S Rack and pull the plug out of the mains power supply. Unscrew the screws
of the top cover. Take the top cover off.
2. To discharge, touch a radiator or another metallic installation connected to earth ground. Take the
interface card out of its packaging. Check that it is the correct type of card. There is a label specifying the
type on the connector.
Caution!
Static charges can damage the electronic components of the Comfort Pro S.
3. Carefully plug the interface card into its designated slot.
Make sure the card is sitting firmly in the slot.