T-Comfort Comfort Pro S, Mounting And Commissioning Manual

Page: 43 / 200

41
Interface Cards Installation
Comfort Pro IF a/b4: 4 x a/b
Comfort Pro IF a/b8: 8 x a/b
Installing the Power Supply Unit
1. If you want to change the power supply unit, first switch off the
Comfort Pro S and pull the plug out of the mains power supply.
2. Take the cover off the Comfort Pro S (see Opening and Closing
Comfort Pro S starting on page 30).
3. Pass the Velcro fastener through the recesses in the bottom of
the casing.
ab 1/1 ab 1/2 ab 1/4 ab 1/3 ab 2/1 ab 2/2 ab 2/3 ab 2/4
- - - - - - - -
- - - -
Slot 1 Slot 2
ab 1/1 ab 1/2 ab 1/4 ab 1/3 ab 2/1 ab 2/2 ab 2/3 ab 2/4
ab 1/5 ab 1/6 ab 1/7 ab 1/8
- - - -
Slot 1 Slot 2
ab 2/5 ab 2/6 ab 2/7 ab 2/8