Installing the Glitel GT–318RI DSL modem
14
15
Connecting the Glitel GT–318RI modem to
the computer:
1. Plug one connector (RJ45) of the Ethernet
cable enclosed in the packaging into your
computer’s network card port and the
other identical connector to the Ethernet
port on the back panel of the
Glitel GT–318RI modem.
2. Plug the adapter to the power supply
(230V). Plug the adapter’s cable into the
modem and switch on the modem by
pressing the button on the modem’s back.
3. The Glitel GT–318RI modem is now
switched on and ready for configuring.
This state is indicated by the PWR control
glowing solidly. Your modem’s DSL control
may glow, too; it means that the modem is
synchronised with your DSL line.
Please read the following instruction
before the installation:
If you have already used an Internet
connection on your computer, set your
browser (Internet Explorer and the like) so as
to not demand a dial-up Internet connection.
Internet Explorer users should follow the
steps below:
1. Launch the Internet Explorer (click on the
Internet Explorer icon).
2. Select “Tools” and “Internet Options”.
3. Select the item “Connections”.
4. Tick the “Never dial a connection” option.
5. Click “OK”.
> Self-Installation Guide
> Glitel GT–318RI DSL modem
Installing a Glitel GT–318RI modem:
In order to work with the Glitel GT–318RI
modem, you must set the properties of your
computer’s network card correctly. The
easiest solution is to set the properties of the
TCP/IP protocol so that the system obtains
the IP address from the DHCP server – your
Glitel GT–318RI modem. It is also necessary
to set the system so that it obtains the
address of the DNS server automatically.
Set the network on your PC by following the
steps below:
1. Click on “Štart”.
2. Select “Nastavenia”.
3. Select “Ovládací panel”.
4. Select “Sieťové pripojenia”.
5. Right click on “Local Area Connection”
and select “Vlastnosti”.
6. Click on “Internet Protocol (TCP/IP)” and
then on “Vlastnosti”.
7. Select “Získať adresu IP automaticky”.
8. Select “Získať adresu servera DNS
automaticky”.
9. Click “OK”.
