Contact:
Musikhaus Thomann
Treppendorf 30
96138 Burgebarch
Germany
Tel.: +49-9546-9223-0
Fax.: +49-09546-6774
Web: www.thomann.de
E-Mail: [email protected]
Suggestions?: [email protected]
the t.bone SCT-800
Specifications subject to change without notice!
Diagrams:
Introduction:
Thank you for purchasing the SCT-800 microphone.
Warning:
Never remove the screen holding the capsule, as this can
damage the microphone!
Caution:
Do not drop your microphone! This can cause severe damages!
Maintenance and cleaning:
When the microphone is not in use, take it out of its shock mount
and place it in its case.
Clean with wet cloth only.
Specifications:
Type:
large diaphragm condenser,
with vacuum tube
Frequency response:
20Hz to 20kHz
Polar Pattern:
cardioid
Sensitivity:
14mV/Pa (@1kHz, 74dB SPL)
Output impedance:
<200 ohms
Equivalent noise level:
<17dB-A
Max. SPL (@0,5% THD): 125dB
Power:
external power supply unit
Audio connection:
3-pin XLR
We’d like to thank you for your confidence in the product and
hope that you will enjoy your new microphone.
Quick start guide:
1. Connect the microphone to the
power supply with the 7pin XLR
cable.
2. Connect the power supply audio
output to your mixer. Take care,
that phantom power is switched off.
3. Connect the power supply to an AC
outlet and switch it on.
4. Allow the microphone to warm up
its tube for at least 10 minutes
before use.
R
-1
9
1
1
0
4
K
R
