T+A TLS 20 A, User Manual

Page: 16 / 20

16
TALIS active loudspeakers feature a power-on delay. The
purpose of this is to protect the drive units from voltage
surges which occur when power is initially switched on. The
delay is about ten seconds, i. e. you have to wait until the
active speakers are ready to work.
If you wish to integrate a sub-woofer into your system, this
can be connected to the DIN output socket of the second
loudspeaker.
If the sub-woofer does not feature a corresponding input
socket, you can use the Cinch inputs with the help of a
second adaptor. The adaptor and matching DIN connecting
lead are available as accessories from your specialist

dealer.
If your sub-woofer features a switching voltage input, you
can connect this to the barrel plug attached to the second
adaptor. If you don’t need to use the barrel plug, leave the
plastic cap on it to avoid possible short-circuits with other
devices.
Connection to power amplifier outputs
If you wish to connect your TALIS active loudspeakers to a
source device (e. g. power amplifier) which does not have
suitable Cinch outputs, you will require a separate adaptor
box. This enables you to connect the active loudspeakers
to the loudspeaker output of a source device.
This adaptor box is available as an accessory from your
specialist
 dealer.
The following diagram shows how the units have to be
connected together in this configuration: