T+A MP 2000 R Mk II User Manual Download

Page: 51 / 74

Over voltage

The  unit  may  be  damaged  by  excess  voltage  in  the  power  supply,  the  mains
circuit  or  in  aerial  systems,  as  may  occur  during  thunderstorms  (lightning
strikes) or due to static discharges.
Special  power  supply  units  and  excess  voltage  protectors  such  as  the



'Power Bar'

mains distribution panel offer some degree of protection from

damage to equipment due to the hazards described above.
However, if you require absolute security from damage due to excess voltage,
the only solution is to disconnect the unit from the mains power supply and any
aerial systems.
To avoid the risk of damage by overvoltages we recommend to disconnect all
cables from this device and your HiFi system during thunderstorms.
All mains power supply and aerial systems to which the unit is connected must
meet all applicable safety regulations and must be installed by an approved
electrical installer.

Approved usage

The  device  is  designed  to  operate  in  a  temperate  climate.  The  range  of
permissible  operating  temperatures  is  +10  …  +35°C.  This  device  is  designed
exclusively for reproducing sound and/or pictures in the domestic environment.
It  is  to  be  used  in  a  dry  indoor  room  which  meets  all  the  recommendations
stated in these instructions.
Where  the  equipment  is  to  be  used  for  other  purposes,  especially  in  the
medical field or any field in which safety is an issue, it is essential to establish
the unit’s suitability for this purpose with the manufacturer, and to obtain prior
written approval for this usage.

Approval and conformity
with EC directives

In its original condition the unit meets all currently valid European regulations. It
is approved for use as stipulated within the EC.
By attaching the CE symbol to the unit



declares its conformity the EC

directives (See page 4) and the national laws based on those directives.
The original, unaltered factory serial number must be present on the outside of
the unit and must be clearly legible! The serial number is a constituent part of
our conformity declaration and therefore of the approval for operation of the
device. The serial numbers on the unit and in the original



documentation

supplied with it (in particular the inspection and guarantee certificates), must
not be removed or modified, and must correspond.
Infringing any of these conditions invalidates



conformity and approval, and

the unit may not be operated within the EC. Improper use of the equipment
makes the user liable to penalty under current EC and national laws.
Any modifications or repairs to the unit, or any other intervention by a workshop
or other third party not authorised by



, invalidates the approval and

operational permit for the equipment.
Only genuine



accessories may be connected to the unit, or such auxiliary

devices which are themselves approved and fulfil all currently valid legal
requirements.
When used in conjunction with auxiliary devices or as part of a system this unit
may only be used for the purposes stated in the section

Approved usage

Disposing of this product



The only permissible method of disposing of this product is to take it to your
local collection centre for electrical waste.

FCC Information to the user

(for use in the United States of
America only)

Class B digital device

– instructions:

Note: This equipment has been tested and found to comply with the limits for a
Class  B  digital  device,  pursuant  to Part 15 of the FCC Rules. These limits are
designed  to  provide  reasonable  protection  against  harmful  interference  in  a
residential  installation.  This  equipment  generates,  uses  and  can  radiate  radio
frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the
instructions,  may  cause  harmful  interference  to  radio  communications.
However,  there  is  no  guarantee  that  interference  will  not  occur  in  a  particular
installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different form that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.