38
Operating the Bluetooth source
The
MP 1000 E’s
integral Bluetooth interface provides a means of transferring
music wirelessly from devices such as smart-phones, tablet PCs, etc. to the
MP 1000 E
.
For a successful audio Bluetooth transfer from a mobile device to the
MP 1000 E
the mobile device must support the A2DP Bluetooth audio transfer
protocol.
Connecting the aerial
An aerial must be connected to the unit for Bluetooth transmission. The aerial is
connected to the socket marked ‘
BT
’ on the
MP 1000 E
.
*
The aerial can also be set up free-standing using the magnetic base supplied
in the set; this ensures maximum possible range.
Selecting the Bluetooth
Audio source
Select the 'Bluetooth' source by repeatedly pressing the
button on the
remote control handset, or the
button on the
MP 1000 E
’s
front panel.
The machine’s integral screen now displays 'Bluetooth' as source.
Setting up audio transfer
Before music from a Bluetooth-capable device can be played through the
MP 1000 E
, the external device must first be registered to the
MP 1000 E
. As
long as the
MP 1000 E
is switched on and no device is connected, it is always
ready to receive. In this state the screen displays the message 'not connected'.
This is the procedure for establishing a connection:
Start a search for Bluetooth equipment on your mobile device.
When it finds the
MP 1000 E
, make the connection to your mobile
device.
Once the connection is successfully established, the message on the
MP 1000
E’s
screen switches to 'connected to
YOUR DEVICE
'.
If your device requests a PIN code, this is always '0000'.
The procedure for establishing a connection can only be made if the Bluetooth
source is activated (see chapter
“Basic settings of the MP 1000 E”
).
Due to the large number of different equipment on the market, we are only able
to provide a general description for setting up the radio connection. For detailed
information please refer to the operating instructions supplied with your device.
