T+A M 200, User Manual

Page: 31 / 40

4
Loudspeaker terminals
SPEAKER A
SPEAKER B The M 200 is equipped with connections for two speakers (SPEAKER A and
SPEAKER B). These can also be used for bi-wiring operation.
Connect the red terminal marked „+“ of the M 200 to the corresponding terminal of
your speaker and in the same way connect the black terminal marked „-“ to the minus
terminal of the speaker.
Detailed information regarding the connection can be found in the wiring diagrams
from page 36 onwards.
j
If the loudspeakers are to be used in countries outside the EU the red/black stoppers can
be removed from the loudspeaker terminals. The speakers can then be connected using
banana plugs.
The stoppers are simply a push-fit in the terminals, and can be prised out from the rear
using a suitable tool such as a knife blade.
The speaker terminals may only be tightened and loosened by hand. Never use pliers or
similar tools. This will damage the terminals.
5
System link
E2 Link This socket can be used to control the M 200 via the DAC 200. Connect this socket to
the E2 Link socket of the DAC 200.
6
Mains input
The mains cable is plugged into this socket.
For correct connection refer to the sections
Installation and Wiring and Safety Notes .
31