T+A KW 650, User Manual

Page: 14 / 20

14

CROSSOVER
This adjustor is used to adjust the separation frequency between sub-woofer and
satellite loudspeakers. The larger the satellite speakers, the lower the separation
frequency that should be set.
Set the separation frequency to the lowest point commensurate with the frequency
response of the satellite speakers, otherwise the physical location of the sub-woofer
may become apparent when listening.

VOLUME
This adjustor is used to regulate the amplification of the active unit. Use this adjustor to
match the bass output level to your loudspeakers.

LOW LEVEL INPUT
If you wish to operate your sub-woofer with a pre-amplifier, connect the stereo pre-
amplifier outputs to these input sockets.
These sockets can also be used to connect the unit to the sub-woofer output of a
surround decoder. If the surround amplifier only provides one sub-woofer output, it
sufficient to connect this to one of the sub-
woofer’s inputs (e.g. left), as both inputs are
identical.