14
Operating the CD player
Inserting a CD
•
Open the CD drawer (
on the front panel /
FB100)
•
Place the disc
centrally
in the appropriate depression in the drawer,
with the
side to be played facing down
.
•
Close the CD drawer (
on the front panel /
FB100)
When you close the drawer, the machine immediately reads the CD’s 'Table of
Contents'; the screen displays the message
'Reading'
. During this period all
button-presses are ignored.
The screen then displays the total number of tracks on the CD in the drawer,
e.g.:
'13 Tracks 60:27'
.
It is also shows the current mode of operation, e.g.
Playing a CD
Press the
button on the front panel or on the F100 remote control
handset to begin the playback process.
Playback starts, and the screen shows the mode of operation ( ) and the
number of the track currently being played:
'Track 1'
.
The CD stops after the final track, and the screen again displays the total
number of CD tracks and the overall running time.
Variations
If you press the
/
button after placing the CD in the machine,
the drawer closes and playback starts with the first track.
The open drawer also closes if you enter the number of a track using the
remote control handset.
You can interrupt playback at any time by pressing the
button. During
the interruption the screen displays the symbol.
Press the
button again to resume playback.
Briefly pressing the
button during playback causes the player to skip to
the start of the next track.
Briefly pressing the
button during playback causes the machine to skip
back to the start of the preceding track.
A brief press on the
button concludes playback.
A long press on the
button opens the CD drawer.
Track Select
During playback
Briefly press the
or
button repeatedly until the number of the
track you want to hear appears on the integral screen.
Releasing the button interrupts playback briefly, and after this the desired track
is played.
You can also enter the number of the desired track directly using the numeric
buttons on the remote control handset.
