39
Playback Program
Creating a Playback
Program
Explanation:
A playback program consists of up to thirty tracks of a CD stored in any order
you like. This can be useful, for example, when you are preparing a cassette
recording. A playback program can only be created for the CD currently in the
disc drawer of the
MP 2500 R
. The program remains stored until it is erased
again, or until the CD drawer is opened.
Operation:
When you place the CD in the drawer, the screen displays the total number of
tracks on the disc, e.g.:
'13 Tracks 60:27'
. For creating a playback program
the disc must be stopped.
Activating playback programming mode.
Press the
button
The screen displays the message
'Add Track 1 to Program'
and
'0 Tracks
/ 0:00 Program time'
.
Repeatedly press the
or
button briefly until the number of
the desired track appears on the screen after
'Track'
.
Now store the track in the playback program by briefly pressing the
button.
The screen shows the number of tracks and the total playing time of the play-
back program. Select all the remaining tracks of the program in the same
manner, and store them by briefly pressing the
button.
It is also possible to enter the track directly using the numeric buttons, instead
of using the
/
buttons. After you enter the number, press the
button briefly to store the track, as described above.
If you store thirty tracks, the screen displays the message
'Program full'
.
The playback programming process is concluded when all the desired tracks
have been stored.
End the playback programming process.
Hold the
button pressed in for about one second
Playing a playback program
The playback program can now be played.
Start the playback process.
button
Playback starts with the first track of the playback program. The screen
displays the message
'Program'
while a playback program is playing.
The
and
buttons select the previous or next track, but only
within the playback program.
Erasing a playback program
Briefly pressing
button in
STOP
mode opens the CD drawer, and
thereby erases the playback program.
A playback program can also be erased without opening the CD drawer:
Erase the playback program.
Hold the
button pressed in again for about one second
The playback program is now erased.
