KT-LCD10H E-Bike Display User Manual
Dear customer, please read this manual before you use KT-LCD10H Display. The manual will guide you use the
instrument correctly to achieve a variety of vehicle control and vehicle status displays.
Functions and Display
Instruments using the structure form of instrument body portion and the operation buttons are
designed separately.
1
UP Button
10
CRUISE
Cruise
2
SW Button
11
PAS
Pas level
3
DOWN Button
12
VOL
Battery voltage
4
Battery capacity indicator
13
THROTTLE
Run sign
5
℃
Environment temperature
14
DST
Trip distance
℉
Environment fahrenheit
ODO
Total distance
6
MOT
Power display
15
Backlight and headlights
7
Km/H
Riding speed(metric)
16
brake display
8
6Km/H push power assist
17
AVS
Average speed
9
TM
Single trip time
MXS
MAX speed
TTM
Total trip time
Operation
1.
ON/OFF
Hold
button long to turn on the power, and hold
long for a second time to turn off
the power. When the motor stops driving and when the e-bike is not used for a consecutive 5
minutes, it will automatically shut down and turn off the motor power supply.
2.
Display1
Hold
button to start up and enter display .
2.1 Turn on backlight and headlights
Hold
long to turn on backlight and headlights (the controller
should have headlight drive output function); hold
long again to turn
off the backlight and headlights.
2.2 Assist ratio gear (PAS) switch
Press
or
to switch 0-5 file gear. Gear 1 is for the minimum
power, gear 5 is for the highest power. Each startup will automatically
restore the gear shutdown last time (the user can set randomly). Gear 0 is
without booster function.
2.3
Km/H assist promotion function
Hold
and
flashes, the vehicle drives at the speed not more
than 6Km /h. Release
button, the function is invalid.
2.4
Display and delete of single data
After power on for 5 seconds, hold
and
at the same time,
single trip riding time (TM) and single trip distance (DST) flash, press
button , the content of both is cleared. If failed holding the button within
5 seconds, it will automatically return the display interface after 5 seconds,
original content is preserved.
3.
Display2
Press
button in display 1 to enter display 2.
In the riding mode after 5 seconds, display 2 automatically returns to
display 1, and the original motor power (MOTOR W) display the output of
temperature detection signal).
4. Display 3
Press
button in display 2 to enter display 3.
In the riding condition, five seconds later, a single maximum speed (MXS)
display automatically returns to the real riding speed (Km/H).
5. In display 3, press
button,and the display will re-enter display 1.
6.
Hold
button to turn off the display and the power supply of controller.
