SZICS NIS-H892, User Manual

Page: 37 / 53

NIS-H892 User Manual
22 
USB transfer time-out: The time-out value for Control, Bulk, and Interrupt transfers.
Device reset time-out :USB mass storage device Start Unit command time-out.
Device power-up delay: Maximum time the device will take before it properly reports
itself to the Host Controller.
3.3.5 Super IO Configuration
Super IO Chip: Read only, to display Super IO chipset model.
Serial Port 1-6 Configuration: 6 COM setup, including interruption and default
address.
Restore AC Power Loss: Specify what state to go to when power is re-applied after a
power failure (G3 state)..
1. Power on: System will always power on when restore AC power
2. Power Off: System will not power on when restore AC power
3. Last State: whether power on depend on the state when Power Loss