STEAM IRONING
This function can be used only at higher ironing temperature.
●●
for moderate steam
●●●
or MAX for maximum steam
•
Fill water into the iron as described on page 3.
•
Stand the iron upright.
•
Connect he iron to a suitable mains supply outlet
•
Turn the temperature control dial(6) to the “
●●
”, “
●●●
”or MAX setting
•
The pilot light turns off when the required temperature is reached. The iron is ready for use.
•
Turn the steam control knob (6) to the required position, steam starts coming out from the holes in the
sole plate.
Notice: With conventional steam ironing, water may leak from the sole plate if a very low temperature has been
selected. If this happens, turn the temperature control dial (6) to the advised position. Steam will recommence as
soon as the appropriate temperature has been reached.
BURST OF STEAM
This function provides an extra amount of steam to remove stubborn wrinkles.
•
Fill the iron with water as described on page 3.
•
Turn the temperature control to the position “MAX”
•
The pilot light turns off when the required temperature is reached
•
The iron is ready for use
•
Press the Burst of Steam button (5) once
•
Steam will penetrate into the garment removing the wrinkles
•
Wait a few seconds before pressing the steam button again when there are stubborn wrinkles. Usually
all wrinkles can be removed within three pressings
DRY IRONING
•
Connect the iron to a suitable mains supply outlet.
•
Ensure that the steam control knob(3) is in position”0”
•
Select the setting on the temperature control dial (6).
•
When the pilot light turns off, the required temperature is reached. The iron is ready for use.
CARE AND CLEANING
•
Turn the temperature control dial (6) to “OFF”, then disconnect the iron from the wall outlet and let it
cool down completely.
•
Deposits and other residues on the sole plate can be removed with a cloth soaked in a vinegar/water
solution.
•
The casing may the wiped with a damp cloth and then polished with a dry one.
•
Never use any abrasives to clean the sole plate.
•
Keep the sole plate smooth; avoid contact with metal objects.
SAFETY PROTECTIVE CUT-OUT
In the unlikely event of the thermostat failing, the protection cut-out will operate to prevent the iron overheating.
Then the iron should be taken to the nearest authorized service facility.
Summary of Contents for SY-PV5
Page 1: ......