Operation
When used for the first time, wash the bowl, the lid and the blade unit with hot water and normal
washing up liquid.
Rinse thoroughly and dry the parts before using them again. Before using, make sure that the bowl is
not broken and that there are no cracks.
☞
☞
☞
☞
The blades are very sharp; handle them with great care.
For safety reasons, observe the following sequence when using the appliance:
- Place the blade group (3) on the guide pin (4a) of the container.
- Cut the food into small pieces before placing it in the bowl (4) observing the amounts indicated
in the “Amounts and times” table.
- Place the lid (2) on the bowl (4) and press the buttons (2a) while moving the bowl into position
until it catches (fig. “C1”).
- Place the motor block (1) on the cover (2) of the bowl (4) turning it slightly to connect the motor
pin with the blades.
- Connect the plug to the electrical socket, making certain that the mains power corresponds to
the indications on the tag on the back of the appliance
- While pressing on the motor block (1) of the lid (2) push the on/off switch (7) to operate the
appliance in a continuous or instantaneous manner until the desired result is achieved (fig. “D”).
- To stop the appliance, release the button and wait for the blades to stop. Then remove the plug
from the mains outlet, remove the cover (2) by pushing the buttons (2a), remove the blade
group (3), being careful not to cut yourself, and then remove the food from the bowl.
