under the spout: in this case, the spout must face downwards.
7.
Insert the plug into a suitable wall socket.
8.
Cut the citrus fruit in half and push one of the halves lightly down on to the cone
with the cut section facing downwards.
9.
The drive shaft will start rotating automatically once pressure is applied to the
cone. The appliance switches off automatically when the pressure on the cone is
lifted.
10.
When processing larger quantities of fruit, the pulp sieve must be emptied from
time to time.
11.
To collect the juice, place a suitable container under the spout .Push the spout
downwards. The extracted juice passes now straight into the container. Once the
desired amount of juice has been collected, push the spout upwards again to fill
the juice container.
12.
Remove the main plug from the wall once you have finished using the juicer.
TIP: Sytech recommends cleaning the appliance immediately after use as dried fruit
pulp is more difficult to remove. (See under “Cleaning”)
Cleaning
1.
Always make sure that the appliance is unplugged before cleaning.
2.
Remove all detachable parts from the motor unit.
3.
Separate the sieve and the cone.
4.
Clean all the detachable parts with hot water and some washing-up liquid or
otherwise, they can even be washed in the dishwasher.
5.
Do not use abrasives, harsh cleaning solutions or a hard brush for cleaning.
6.
Clean the motor unit with a moist cloth.
NOTE: Never immerse the motor unit in water nor rinse it under the tap.
Storage
1.
Store the appliance in a safe and dry place.
SPECIFICATIONS
Operating voltage: 220V~240V / 50Hz
Capacity: 1.2 L
Power: 85W
KB: 5 minutes
Working mode: 15 seconds max. (Wait 15 seconds for second use). Max. 10 cycles