CONTROLS AND FEATURES
A. Operation Button
B. UV-A and UV-C Lights
C. Top cover lid
D. Inner compartment
E. Aromatherapy compartment
F. Magnet Switch
BEFORE USING THE SY-CE30
1. Check the device, making sure it isn’t damaged and in perfect condition
2. Make sure to connect the device to a power supply of a maximum of 3W.
3. A green indicator light on the operation button should flash three times when connected. If
the green light does not turn on, please check whether the charging cable or the power
plug are connected properly.
4. Make sure you use the device in a safe space, away from children and on a flat surface.
5. Make sure the lid of the box closes firmly.
USING THE SY-CE30
For best results, make use of the aromatherapy function which is thoroughly explained
under the section of AROMATHERAPY.
1. Connect the Type-C cable to the UV Box and then to a power supply of a maximum of 3W.
A green light will turn on and flash three times indicating that the device is connected and
working.
2. Insert the item you wish to sterilize into the UV Box and close the lid firmly.
3. Once closed, a 5-minute de-germing process will commence. A green light will light up
and a buzzer will beep indicating that the
ultraviolet light has been turned on inside the box
and the sterilizing process has begun.
4. After a total of 5 minutes, a buzzer will beep three
times in a row indicating the end of the
sterilization process.
5. Once the buzzer has stopped, the ultraviolet light
will turn off automatically. This then indicates that
it is safe to open the lid and take out the contents
from the box.
6. If the UV box hasn’t been used in a long time, a
preheating process might commence which lasts
around 10 seconds (once the lid is closed).
7. To further improve the sterilization process, use
the aromatherapy function.
NOTE: Opening the lid automatically turns off the ultraviolet function with the use of the magnet
switch in order to prevent harmful effects to the human body.