Do not operate the blender for more than 3 minutes consecutively.
Once the mixture has been blended to your desired consistency, turn the speed selector to
“0” position
Turn anti-clockwise and remove the jar from the Motor unit, carefully remove the measure
cup and then the contents can be poured and served.
Cleaning and Maintenance
The Auto Clean function can clean the blender and blades easily, rapidly and safely.
Pour some warm soapy water into the jar and turn the Speed Selector to P position for a
few seconds
Remove the jar and rinse under running water.
Always wipe the outer surface of the motor unit with a moistened cloth, do not use any
abrasive cleaners.
Never immerse the motor unit in water for cleaning.
Dry all parts thoroughly and place them back in their position.
The blades can be disassembled for complete cleaning. Hold the blades carefully, (Warning:
the blades are sharp) take it out by turning the cup and the blades at the same time, in
opposite directions. Then place the top cover, measuring cup, the jar and blade assembly
into the dishwasher for cleaning. These parts are all dishwasher safe components. However
make sure that the temperature setting of the dishwasher does not exceed 60º
If any problem has been encountered during use never disassemble the motor base by
yourself, there are no user serviceable parts inside. Contact Sytech Service Centre for any
queries.
Technical Specifications
Electric Table blender
Motor power: 400W.
6 leaf blades of stainless steel
Removable parts for easy cleaning.
2 speeds with Turbo function
Housing material: Stainless steel
Jar material: Glass
Jar capacity: 1.5L
Safety switch
Weight: 3.4 Kg.
Dimensions: 21 x 18 x 37.5 cm.
Power source: 230V / 50Hz.
