Sytech SY-933, User Manual, Page: 4 / 7

3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh
ones.
4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove
the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow
battery manufacturer’s directions.)
6. Do not dispose of batteries in fire, batteries may explode or leak.
7. Clean the battery contacts and also those of the device prior to battery installation.
Operation
CD/MP-3 Playback:
1. Slide the CD Door Open switch to the right to open the CD Door.
2. Place a CD or MP3-CD disc on the center spindle, with the printed side facing up.
3. Close the CD door.
4. Press the PLAY/PAUSE button to turn on the unit .The unit will play the first track automatically.
5. Press the VOL (Volume) +/- buttons to adjust the volume level as desired.
6. During playback:
A. Press the PLAY/PAUSE buttons to adjust volume level as desired.
B. Press the SKIP/SEARCH buttons to skip tracks.
C. Press and hold the SKIP/SEARCH buttons to fast forward to a specific section of the track.
7. To stop playback, press the STOP
■
button. Press the STOP
■
button again to turn the unit off.
Repeat/Random Playback:
CD:
During playback, press the MODE button repeatedly to set the play mode as:
1. Press the MODE button once: The REP (Repeat) icon will appear on the display and the unit will play the current
track repeatedly until the STOP
■
button is pressed.
2. Press the MODE button twice: The ALL REP (All repeated
）
icon will appear on the display. The unit will now play
all the tracks in the current disc repeatedly until the STOP
■
button is pressed.
3. Press the MODE button three times: The INTRO (Introduction) icon will appear on the display. Then press the
SKIP/SEARCH button and the unit will play the first 10 seconds of each track. Press the PLAY/PAUSE ll
button to play the current track.
4. Press the MODE button four times: The RAND (Random) icon will appear on the display. The unit will play the
tracks on the current disc in random order.
CD MP3:
During playback, press the MODE button repeatedly to set the play mode as :
1. Press the MODE button once: The REP (Repeat) icon will appear on the display and the unit will play the current
track repeatedly until the STOP
■
button is pressed.
2. Press the MODE button twice: The ALBUM REP icon will appear on the display. The unit will play all the tracks
in the current album until the STOP
■
button is pressed.
3. Press the MODE button three times: The ALL ALBUM REP icon will appear on the display. The unit will play all
the tracks in current disc repeatedly until the STOP
■
button is pressed.
4. Press the MODE button three times: The INTRO (Introduction) icon will appear on the display. Then press the
SKIP/SEARCH button and the unit will play the first 10 seconds of each track. Press the PLAY/PAUSE ll
button to play the current track.
5. Press the MODE button four times: The RAND (Random) icon will appear on the display. The unit will play the
tracks on the current disc in random order