Sytech SY-4065, User Manual, Page: 6 / 13

9 8
The Remote Control
1
2
CR2025 CR2025
Please put the battery into the remote control as shown below in the illustration.
When using the remote control, make sure the infrared window is pointed to the infrared
recieving window of the unit. The distance between the unit and the remote control
should be within 3 metres. Please refer to the illustration below.
The Use of Remote Control
1. Number button
2. TITLE(To display title information)
3. AUDIO(To select audio language)
4. SETUP(To go to or exit setup menu)
5. Previous/Next button(To go
to previous/next chapter or scene
during playing)
6. Fast forward/backward
button(To scan forward/backward
at 2,4,8,16,or 32 times)
7. OSD(To display disc information
during playing such as elapsed and
remaining time)
8. PLAY/PAUSE
9. STOP(press once to stop playback, then
press to resume playback from the
point where you stopped; press stop
button twice to stop playback completely)
10.IN/OUT(To input or output signal)
11.USB/SD(To change DVD and AV IN mode)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
12.
13.
14.
15.
16.
17.
18.
19.VOL+/-(To adjust the volume)
20.ENTER(To confirm)
MENU(To enter or exit root menu)
SUBTITLE(To select subtitle language
when playing DVD disc)
ANGLE(To change viewing angle
when playing disc with multi-angle)
A-B(Repeat a specific portion from
point A to B, press it again to cancel
repeat playing)
REPEAT(To repeat playing title,
chapter or track)
RETURN(To return to the main menu)
ZOOM(To zoom in/out the image
during the playback)
20
Note:
1. The remote control should not be placed on table edges to avoid falling and should
not be placed near damp environments.
2. Avoid placing the unit under direct sunlight as this may block the infrared receiving
window of the unit.
3. Replace the old battery with a new one when the remote control stops working.
0
30
0
30