RADIO RECEPTION
1. Turn on the unit by rotating the ON/OFF Volume Control clockwise until a “click” is heard.
2. Set the AM/FM Band Select Switch to “AM” or “FM” for the desired radio band.
3. Turn the TUNING Control to select the desired radio station.
4. Adjust the ON/OFF Volume Control to obtain the desired sound level.
5. Turn off the unit by rotating the ON/OFF Volume Control fully counterclockwise until a “click”
is heard.
TIPS FOR BETTER RADIO RECEPTION
1. To insure maximum FM tuner sensitivity, try rotating the unit to obtain the best possible
reception.
2. When tuning in AM reception, be sure to place the unit in a vertical position. To insure best
AM sensitivity, try repositioning the unit until the best reception is obtained.
CARE AND MAINTENANCE
1. Clean the unit with a damp (never wet) cloth. Solvents or detergents should never be used.
2. Avoid leaving the unit in direct sunlight or in hot or dusty places.
3. Keep the unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
4. This unit has rubber seals to minimize the risk of moisture getting inside. However, do not
immerse it in water since permanent damage to the electrical and mechanical parts will
result.
5. Always wipe the outside of the cabinet thoroughly if it becomes wet with moisture or water
splashes. This will help to prevent the internal parts of the unit from entry of water and
possible moisture damage.
SPECIFICATIONS
Water Resistant: IPX4
Power Source: 4 x “AAA” LR03 batteries
Speaker Power Output: 420 mW
FM frequency range: 88 – 108 Mhz
AM frequency range: 530 – 1600 Khz
Dimensions: 130(h)x110(w)x56(d)mm
Weight: 210 g (battery excluded)
Summary of Contents for SY-1636
Page 1: ......