Sytech SY-1045 User Manual Download Page 7

 

 

-

 

The  presence  of  dangerous  substances  in  the  electrical  and  electronic 

equipments  can  have  potential  consequences  on  the  environment  and 

human health in the cycle of reprocessing this product. 

-

 

Therefore, at the end of its lifetime, this product shall not be disposed 

with  other  non-recycled  waste.  Used  electrical  and  electronic  equipment 
must be treated separately and in accordance with legislation that requires 
proper  treatment,  recovery  and  recycling  of  used  electrical  and  electronic 

equipment. 

-

 

Local  authorities  and  resellers  have  set  special  procedures  for  the 

purpose  of  collecting  and  recycling  this  product  (please  contact  your  local 
authority  for  further  details).  You  have  the  obligation  to  use  the  selective 

waste collection systems put in place by your local authority. 

-

 

If your used electrical or electronic equipment has batteries or 

accumulators, please dispose of these separately beforehand according to 
local requirements. 

 

By  disposing.of  this  product  correctly  you  will  help  ensure  that  the  waste 

undergoes  the  necessary  treatment,  recovery  and  recycling  and  thus 
prevent  potential  negative  effects  on  the  environment  and  human  health 

which could otherwise arise due to inappropriate waste handling. 

 

 

 
 

This  unit  complies  with  European  Council  Directive  2006  /  95  CE 
(Electromagnetic Compatibility & Low Voltage Directives) 

 

 
 

 
 

 

 

 

Summary of Contents for SY-1045








Reviews: