E-5
9.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. A reversed battery may cause damage to the device.
3. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
4. Do not try to recharge a battery not intended to be recharged; it can overheat and damage
the unit.
IMPORTANT NOTES
Avoid installing the unit in locations described below:
•
Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
•
Dusty places.
•
Places subject to constant vibration.
•
Humid or moist places.
SPECIFICATIONS
Power supply:
AC 230V ~ 50 Hz
Backup battery :
2 x AAA, 1.5V batteries
FM Frequency Range:
88 - 108 MHz
Power consumption:
5W
6. FM SET
Press the FUNC button to turn on the unit and to switch to FM mode. Adjust the volume by
pressing the VOL+ and VOL- button.
To store a desired FM station, press the MEMO button for approximately 3 seconds. The “MEM”
symbol will flash on the display. Select the desired position by pressing the SCAN+ or SCAN-
button. Press once more the MEMO button to confirm the selection. Now your favorite station is
stored in the selected preset number. You can store a maximum of 10 stations.
7. BRIGHT OR DIM SET
The negative display of the SY-1032 is perfect for the night as it does not reflect the numbers.
To increase the luminosity of the display, press the LIGHT button for the display to brighten up.
After approximately 1 minute, the display will return to the original dim light.
8. TIME MEMORY SET
The SY-1032 includes a battery backup feature in case of power failure. Plug in the radio clock
to the mains output. Adjust al the parameters such as the year, month,date and time. Open the
battery compartment located at the bottom of the unit and insert 2 x AAA batteries in the correct
position (Not included).In the case of any cut off power, the SY-1032 will retain the actual time
and date until the main power comes back.