ELECTRONIC CLOCK OPERATION
1. Plug the AC line cord into 230V AC home outlet
2. The unit is now working as an electronic clock and the display will flash the clock figures to
show you it is not set correctly.
3. To set the correct time, depress the Time Set Button (2) and Hour Button (6)
simultaneously; release the buttons approximately before the correct time is reached.
Now depress the Minute Button (7) and the Time Set Button (2) simultaneously, to set the
readout to the correct time precisely.
RADIO OPERATION
1.
Slide the ON/OFF/AUTO Switch (1) to “ON” position.
2. Slide Band Switch (9) to FM or AM position.
3. Turn the Volume Control (8) to desired volume.
4. Turn the Tuning Control (10) to select your favorite station.
5. Antenna
For AM reception, this radio incorporates a highly sensitive ferrite core bar antenna.
For FM reception, this set is specially equipped with an external wire as FM antenna. Be
sure to untwist it to its fullest length for peak performance.
WAKE TO RADIO
Having selected your station and set the volume at the desired level, proceed as follow:
1.
Slide the ON/OFF/AUTO Switch (1) to “AUTO” position.
2. Press the Alarm Set Button (3) and whilst this button is depressed, press the Hour Button
(6) and then the Minute Button (7) until the time is reached at which you wish to wake. The
wake up time is now entered into the timer memory. To check the wake up time, simply
press the Alarm Set Button (3) and the clock will show the present time. The preset wake
up time will continue to be registered in the time memory and the radio will switch on by
itself at the same time the next day. To switch the radio off, simply press the Alarm Off
Button (3).
When wake to radio is set, but you wish to listen to the radio before alarm time set. Press
the SLEEP button (4) once to turn the radio on and press SNOOZE button (5) once to turn
the radio off.
WAKE TO BUZZER
Set the controls as for “Wake to Radio” but volume control (8) to BUZZER position. The
buzzer can then be switched off by pressing the Alarm Off Button (3) or it can be converted to
the
radio by selecting switch (1) to “ON” position.
