Parts of the SY-BV9
1) Removable filter cap
2) Lid
3) 1500mL. Glass Jar
4) Sealing ring
5) Blade
6) Cup base
7) Rotary Switch
8) Motor Base
9) Jar Assembly
Before first use
All parts of the blender are to be thoroughly cleaned before being used for the first time. (See section:
Cleaning).
Take out the required length of cable from the cable tidy on the base of the blender and connect the device to
the mains supply.
Assembling the Glass Jar
1. Put the rubber-sealing ring (4) on the inner edge of the 6- blade (5).
2. Put the blade unit with the sealing ring into the cup base (6).
3. Insert the assembled Cup Base onto the bottom of the glass jar and secure tightly.
4. Mount the glass cup (3) onto the cup base unit, and turn clockwise until the glass jar locks into place.
5. Mount the removable filter cap (1) onto the Lid (2).
6. Secure the Lid onto Glass Jar and press down.
Inserting the Glass Jar
s switched
off (Switch in the ‘0’ setting).
1. Place the jar assembly (9) on to the motor base (8) and press down until it has been securely fitted.
Using the blender
1. Place the food items you wish to process into the glass jar.
2. Put the lid on the glass jar and close securely. Place the removable filter cap into the hole in the lid and turn
clockwise to lock.
3. Switch on the motor base:
Speed setting Use
1 – 3 (Low) for light usage with liquids
4 – 6 (High) for more solid consistency – for mixing liquids and solid foodstuffs
P (Pulse setting) for ice crushing & short, powerful impulse movements
