SySTIUM
®
TECHNOLOGIES
MotherBoard Ready
TM
System • MODEL 215
Copyright © 2013, SySTIUM® Technologies, LLC
PN: 90215-00 Rev 00
PRODUCT REGULATORY COMPLIANCE
Radio Frequency Interference Notice
(USA)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Any changes or modifications not expressly approved by the
grantee of this device could void the user's authority to operate
the equipment. The customer is responsible for ensuring
compliance of the modified product.
Only peripherals (computer input/output devices, terminals,
printers, etc.) that comply with FCC class B limits may be
attached to this computer product. Operation with noncompliant
peripherals is likely to result in interference to radio and TV
reception.
All cables used to connect to peripherals must be shielded and
grounded. Operation with cables, connected to peripherals that
are not shielded and grounded may result in interference to radio
and TV reception.
Manufacturer: SySTIUM®
Technologies, LLC
New Hope, MN
763-537-3600
Contact:
Customer Support
Radio Frequency Interference
Notice (CDN)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Declaration of the Manufacturer or
Importer
This system is compliant with Low Voltage Directive 2006/95/EC
using the standard IEC60950-1 according to EN60950-
1:2006/A11:2009/A1:2010/A12:2011.
This system is compliant with EU directive 2004/108/EC using
the standards EN55022 and EN55024-1.
SAFETY COMPLIANCE
UL 60950-1 Second Edition; CSA60950-1-07 Second Edition
Amendment 1:2009
Information Technology Equipment - Safety - Part 1: General
Requirements
EN 60950- 1:2006/A11:2009/A1:2010/A12:2011;
The Standard for Safety of Information Technology Equipment
including Electrical Business Equipment. (European Union)
“EN 60950 compliance”
IEC 60950-1:2005 (2nd Edition); Am 1:2009
The Standard for Safety of Information Technology Equipment
including Electrical Business Equipment. (International)
EMC COMPLIANCE
FCC Class B
Title 47 of the Code of Federal Regulations, Parts 2 & 15, Subpart B,
pertaining to unintentional radiators. (USA) “EMI
regulations” “FCC compliance”
CISPR 22; 2003
Limits and methods of measurement of Radio Interference
Characteristics of Information Technology Equipment.
(International) “CISPR 22compliance”
EN 55022
Limits and methods of measurement of Radio Interference
Characteristics of Information Technology Equipment. (Europe)
“EN 55022 compliance”
EN 55024-1 2003
ITE Immunity Standard;
ICES-003, Issue 3
Disclaimer Statement
Systium
Technologies makes no warranty of any kind with regard
to this material, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose.
Systium
Technologies assumes no responsibility for any errors
that may appear in this document. Systium
Technologies makes
no commitment to update nor to keep current the information
contained in this document. No part of this document may be
copied or reproduced in any form or by any means without prior
written consent of Systium
Technologies.
† Third-party brands and trademarks are the property of their
respective owners.
