11
3. Check that the lights are active on the network port on NetConnect - orange = solid,
green = flashing. If not, refer to ‘Cannot find NetConnect on the network’ above.
Can’t rename a zone:
1. When renaming a zone the information has to be sent via the WiFi network from the device
you are using to rename. (iOS only)Go to the closest WiFi access point or WiFi router, open
the S7 app press the zone you want to rename and make sure it is at the top of your list. Now
press the i button to the right of the zone name, select
change zone name
and enter in the
required name followed by
Done.
For any further help please email [email protected] or check our website
www.systemline.co.uk.
16.0 Factory Default
On the top of NetConnect you will find a recessed button, using a pin or a paper clip inserted
through the hole press the button in until you see a faint light flashing rapidly through the top of
the unit, (look through the holes on the right towards the middle of the unit) release the button
when the lights are flashing and wait for the NetConnect to reboot.
Note: This will erase all user account settings for any streaming services.
