sWiFi/all
User Manual
17
Operation Setting
In [Operation Setting], you can configure operation modes and socket options. The [Submit] button must be clicked to save
the changes you have made. For changes to take effect, the device must be rebooted. You can do it from [Reboot] menu. If
changes are not saved, changed values will be lost when the device is turned off or rebooted.
If you did not click the [Submit] button to save the changed values, you can click the [Cancel] button to return to its
previous values.
The main features are as follows:
Menu
Default
Description
Operation
Mode
COM
Redirector
Configure operational protocol for the serial port.
COM Redirector
This allows sLAN/all serial port to be used as a virtual COM port for
Windows. When using this mode, serial settings follow what is set in
the virtual COM Port.
TCP Server
For a client device from the same network to access, this device
can run as a server. A socket number can be configured from [Local
Port]. When the socket is connected, any data received from the
sLAN/all will pass the socket and the serial port.
TCP Client
A sLAN/all can run as a client to connect to the server in the same
network. When the socket is connected, any data received from the
sLAN/all will pass the socket and the serial port. The IP address of
the server can be set from [Target IP/Port].
UDP Server
For a client device from the same network to access, this device
