SystemBase Multi-1/USB Ver4.0 User Manual Download

Page: 14 / 63

USB to Serial

User Manual

Multi-1/USB Ver4.0

Multi-1/USB Ver4.0 is a model that supports USB1.1 and USB 2.0. It is detected automatically when it is connected

to a USB port with a computer using Linux or Windows. It supports maximum communication speed of 921.6Kbps.

Furthermore, it is equipped with surge protector to protect internal systems from outer shock.

For Combo model, user can set and/or enable communication mode and terminal resistor.

Also, the LEDs are attached outside to show the current status of communication.

- Specification

Communication Speed

Maximum 921.6Kbps

Bus Interface

USB 2.0 (Full Speed)

Cable

Latching Connector applied, 0.6m(1.96ft)

Signal

RS232/RS422/RS485

Controller

FTDI 232R

Connector

DB9 Male

Protection

15kV Surge Protector

Supported OS

Windows 7 or above

Linux Kernel 2.6 or above

Manufacturer

SystemBase Co., Ltd

Summary of Contents for Multi-1/USB Ver4.0
































































Search results

Summary of Contents for Multi-1/USB Ver4.0

Reviews:

Related manuals for Multi-1/USB Ver4.0

Brands by name

Popular brands

SystemBase Multi-1/USB Ver4.0, User Manual

Search results

Summary of Contents for Multi-1/USB Ver4.0

Reviews:

Related manuals for Multi-1/USB Ver4.0

Brands by name

Popular brands