SystemBase Eddy-CPU, User Manual

Page: 46 / 55

Eddy-CPU User Guide
46
4. Serial Commands
You can set the communication and operation environment for the serial port. Chapter 5 describes each
option in detail. Only a summary of each option is presented here.
z
set port 1 status [Enable / Disable] (Default: Enable)
Choose to use or not use this port.
z
set port 1 protocol [com2kxp / com98 / tcp_server / tcp_client / tcp_mserver /
udp_server / udp_client] (Default: com2kxp)
Select the operation protocol, which the serial port would use.
z
set port 1 <port number> (Default: 4001)
Set the socket number for the port. TCP server and UDP server operation mode makes use of
this port for awaiting network socket connections.
z
set port 1 name <name> (Default: Port1)
Port alias name for convenience. 16 Characters at maximum.
z
set port 1 speed [150 / 300 / 600 / 1200 / 2400 / 4800 / 9600 / 19200 / 38400 / 57600 /
115200 / 230400 / 460800 / 921600] (Default: 9600bps)
Set communication speed.
z
set port 1 data [5 / 6 / 7 / 8] (Default: 8)
Set the number of bits in each character size.
z
set port 1 stop [1 / 2] (Default: 1)
Set the number of stop bits.
z
set port 1 parity [none / odd / even] (Default: none)
Set parity bit check scheme.
z
set port 1 flow [none / xon / rts] (Default: none)
Set the flow control scheme.