REMOTE MANAGEMENT
The C510ip-s Codec can be configured remotely by
connecting a straight 9 Way D-Type cable to the
MGR IP port, and using the Standard Windows
Terminal Program. To configure more than one unit
at the same time, the user can connect another
straight 9 Way D-Type cable from the MGR OP port
of the first unit, to the MGR IP port of the next unit,
in a “Daisy Chain” manner. There are no limitations
on the number of codecs which can be linked
together for remote configuration purposes.
On initial connection, the Standard Windows
Terminal Program screen will be blank. The user
should then press the Enter key to clear the
command buffer.
Type “poll” followed by the serial number :-
poll 0108-001 < carriage return / enter >
0108-001>
A prompt of the actual serial number will appear on
the screen.
Type “help” for list of commands.
0108-001 >help
C510ip-s Network Commands, (c) Systembase Limited
poll (8 digit serial number)
status (displays the codecs current status, /s option for
short)
set name (new patch name)
set patch (patch index)
set backup level (0..100)
set restore time (1..90)
set reserve (Off, On)
set aux (Off,
9600bps,
4800bps,
2400bps,
9600bps(alt),
4800bps(alt),
2400bps(alt),
Relay Mode)
set source (Analog, AES3)
set loopback (Off, On)
set x21 (APTX:3K7 Stereo 64Kbps,
APTX:7K5 Mono 64Kbps,
APTX:7K5 Stereo 128Kbps,
APTX:15K2 Mono 128Kbps,
APTX:12K2 Stereo 192Kbps,
APTX:22K5 Mono 192Kbps,
APTX:15K2 Stereo 256Kbps,
APTX:22K5 Stereo 384Kbps)
set password
(Not Set (pin),
Edit Lock (pin),
Full lock (pin))
set isdn
G711:3K2 Dual 64Kbps,
G722:7K5 Dual 64Kbps,
APTX:3K7 Stereo 64Kbps,
APTX:7K5 Mono 64Kbps,
APTX:7K5 Stereo 128Kbps,
APTX:15K2 Mono 128Kbps,
HIT-APTX:7K5 Stereo 128K,
HIT-APTX:15K2 Mono 128K)
set mode
(ISDN Mode,
X21 Mode,
Backup Master,
Backup Slave,
Nailed ISDN)
set mixing (Off, On)
set priority (Bandwidth, Stereo Image)
set autohunt (Off, On)
set alarm (Sync Loss, Backup, Off)
dial (dials the current patch)
hang (hangs the current isdn call)
set rem add (channel) (destination number)
set rem sub (channel) (destination sub addr)
set loc sub (channel) (local sub address)
The Status command will display the following information
on the codec.
0108-001>status
SYSTEMBASE C510ip(c)
Patch Name= Patch 1
Country= EURO ETSI
Mode= ISDN Mode
ISDN 1= Ready
ISDN 2= Ready
APTX Status= SYNC
Loopback= Off
Aux Data= Off
Alarm= Sync Loss
ISDN OPTIONS
ISDN Audio= APTX:15K2 Mono 128Kbps
ISDN Autohunt= Off
CH1 Rem Add= 1111 Rem Sub= Loc Sub=
CH2 Rem Add= 1111 Rem Sub= Loc Sub=
X21 OPTIONS
X21 Audio= APTX:22K5 Stereo 384Kbps
AUDIO OPTIONS
Audio Source= Analog
ISDN Priority= Bandwidth
ISDN Mixing= Off
BACKUP OPTIONS
Backup Level= 50
Restore Time= 10
Reserve Dial= Off
Page 22
