____________________________________________________________________________________________________
Topvex TR09, TR11 & TR15
Installation instruction
205007
Systemair AB
15
Navigating the menus
The start display, the display normally shown, is at the root of the menu tree.
Pressing DOWN
▼
will move you through the menu choices at this, the lowest level. UP
▲
will move you
back through the choices.
To enter a higher menu level, use UP or DOWN to place the display marker opposite the menu you wish to
access and press RIGHT
►
.
If you have sufficient log on privileges the display will change to the menu you have chosen.
At each level there may be several new menus through which you may move using the UP/DOWN buttons.
Sometimes there are further submenus linked to a menu or menu item. This is indicated by an arrow
symbol at the right-hand edge of the display. To choose one, use RIGHT
►
again. To back down to a
lower menu level, use LEFT
◄
.
Commissioning
When the installation is finished, check that:
- the unit is installed in accordance with these instructions.
- sound attenuators are installed and that the duct system is correctly connected to the unit.
- outdoor air intake is positioned with sufficient distance to pollution sources (kitchen ventilator exhaust,
central vacuum system exhaust or similar).
Before starting the system
Control that all external equipment are connected.
See operating and maintenance instructions, "Operation".
Switch on fuse in the unit.
Switch on the supply voltage.
Set present time and date, set the control temperature and program the week schedule. Do the necessary
settings for extra functions if any.
Check that:
- there is no unusual noise from the unit.
- control panel and lamp signals are in function.
