19
Loosen the M5 screws to open the lid (chapter 4.1.)
Unscrew the motor bracket's two screws.
Lift the motor up by holding the motor bracket's handle,
keep fingers away from the back of the hinge. Make sure
that the motor bracket attach to the lock to prevent the
motor from falling down during maintenance.
After maintenance, release the lock, using the handle to
bring the motor down. Fasten the motor bracket with the
screws.
Note:
TFC 225 and TFC 280 has no handle, hold the
motor bracket to lift the motor.
7
Troubleshooting
The following applies in case the fan has stopped:
• Try to restart the fan by cutting the power a couple of minutes.
• Ensure that the impeller is not locked. Disconnect the power supply, remove any obstacles. Check that the fan starts
after reconnecting the current. Should the fan not start please contact your place of purchase.
206434 | A006
Summary of Contents for TFC 225 P
Page 4: ......
