Press this button, the Timing will turn on. Set Timing ON time by and . The
clock will increase and decrease once every 10 minutes; long pressing the keys
it will increase/decrease once 10 minutes/0.2 seconds.
In the unit ON status, press this key at the first time, the Swing type air supply mode
to be activated. Press this key again, the function will cancel (This function could
available only equip with the coordinated entire units system.)
Normally, LCD displays the current time of the setting clock (however, LCD would
display 12:00 when the first time power to the wire controller or reset the wire
controller). Press this key lasting for 4 seconds, the clock will flashing at the frequency
of 0.5 Sec. by using and to adjust the time, 1 minute to be increased/decreased
for every once press the / . Long pressing the / , it will increase/decrease
4 times/sec, 10 mins/time. Release the key when finish the clock setting, the time will
stop flashing automatically.
⑤
Time Button:
⑧
SWING Button:
⑨
CANCEL Button:
⑥
FAN SPEED Button:
⑦
TIMER Button:
Push this button to cancel the TIMER settings.
Press this button consecutively, the fan speed will circle as follow:
(This button is unavailable when in the mode of AUTO or DRY.)
→ → →
SPEED
SPEED
SPEED SPEED
13
Summary of Contents for SYSCONTROL WC 90
Page 1: ...SYSCONTROL WC 90 INSTALLATION OWNER S MANUAL GB...
Page 2: ......
